User's Manual
Table Of Contents
- PTP 250 User Guide
- Copyrights
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This User Guide
- Chapter 1 Product description
- Chapter 2 Planning considerations
- Chapter 3 Legal information
- Chapter 4 Reference information
- Chapter 5 Installation
- Chapter 6 Configuration and alignment
- Chapter 7 Operation
- Chapter 8 Troubleshooting
- Testing link end hardware
- Testing when PoE LEDs do not illuminate correctly
- Testing after a lightning strike
- Test flowcharts
- AC LED is off
- AC LED is flashing
- PORT LED is off
- PORT LED is flashing
- Test Ethernet packet errors reported by ODU
- Test Ethernet packet errors reported by managed switch or router
- Test ping packet loss
- Test resistance at the PoE end of the drop cable
- Testing the radio link
- Testing link end hardware
- Glossary
ODU specifications Chapter 4 Reference information
phn-2182_002v000
4-10
May 2011
ODU specifications
This section contains specifications of the outdoor unit (ODU) that is supplied by
Motorola for PTP 250 installations. These specifications apply to all product variants.
ODU dimensions and weight
The integrated ODU conforms to the physical specifications listed in Table 4-6.
Table 4-6 Integrated ODU physical specifications
Category Specification
Dimensions Width 370 mm (14.5 in), Height 370 mm (14.5 in),
Depth 95 mm (3.75 in)
Weight 5.35 Kg (11.8 lbs) including bracket
The connectorized ODU conforms to the physical specifications listed in Table 4-7.
Table 4-7 Connectorized ODU physical specifications
Category Specification
Dimensions Width 309 mm (12.2 in), Height 309 mm (12.2 in),
Depth 105 mm (4.01 in)
Weight 4.7 Kg (10.4 lbs) including bracket