User's Manual
Table Of Contents
- PTP 250 User Guide
- Copyrights
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This User Guide
- Chapter 1 Product description
- Chapter 2 Planning considerations
- Chapter 3 Legal information
- Chapter 4 Reference information
- Chapter 5 Installation
- Chapter 6 Configuration and alignment
- Chapter 7 Operation
- Chapter 8 Troubleshooting
- Testing link end hardware
- Testing when PoE LEDs do not illuminate correctly
- Testing after a lightning strike
- Test flowcharts
- AC LED is off
- AC LED is flashing
- PORT LED is off
- PORT LED is flashing
- Test Ethernet packet errors reported by ODU
- Test Ethernet packet errors reported by managed switch or router
- Test ping packet loss
- Test resistance at the PoE end of the drop cable
- Testing the radio link
- Testing link end hardware
- Glossary
Web-based management Chapter 7 Operation
phn-2182_002v000
7-6
May 2011
Viewing the system summary
To display the System Summary page, select menu option Home.
The System Summary page (Figure 7-4) co
ntains a high level summary of the status of
the wireless link and associated equipment.
Figure 7-4 System Summary page
The attributes of the System Summary page are described in Table 7-2.
Table 7-
2 System Summary attributes
Attribute Meaning
Wireless Link
Status
Current status of the wireless link.
A green background with status text ‘Up’ means that the
point-to-point link is established.
A yellow background with suitable status text (for example
‘Acquiring’) indicates that the link is not established.
Whenever the Wireless Link Status is not ‘Up’, a yellow
warning triangle is displayed on the navigation bar. For more
information, refer to Managing link status and alerts on pag
e
7-15.
Wireless Link
Mode
Master or Slave. This is set in the Installation Wizard; see
Step 2: Wireless configuration on
page 6-17.
End Location Location of this link end. This is set in the Installation Wizard;
see Step 2: Wireless configuration on page 6-17.