User's Manual
Table Of Contents
- PTP 250 User Guide
- Copyrights
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This User Guide
- Chapter 1 Product description
- Chapter 2 Planning considerations
- Chapter 3 Legal information
- Chapter 4 Reference information
- Chapter 5 Installation
- Chapter 6 Configuration and alignment
- Chapter 7 Operation
- Chapter 8 Troubleshooting
- Testing link end hardware
- Testing when PoE LEDs do not illuminate correctly
- Testing after a lightning strike
- Test flowcharts
- AC LED is off
- AC LED is flashing
- PORT LED is off
- PORT LED is flashing
- Test Ethernet packet errors reported by ODU
- Test Ethernet packet errors reported by managed switch or router
- Test ping packet loss
- Test resistance at the PoE end of the drop cable
- Testing the radio link
- Testing link end hardware
- Glossary
PTP 250 User Guide Web-based management
phn-2182_002v000
May 2011
7-7
Attribute Meaning
Admin Email
Address
The email address configured for email alerts. This is set in
the Installation Wizard; see Step 4: Email configuration on
page 6-22.
PTP 250 Version The currently running firmware version.
System Uptime The time (days and hh:mm:ss) that has elapsed since the last
system reboot.
The system can reboot for several reasons, for example,
commanded reboot from the Reboot PTP 250 webpage, or a
power cycle of the equipment.
Serial Number Serial number of this unit.
Current Time The system clock presented as local time, allowing for zone
and daylight saving. This is set in the Installation Wizard; see
Step 3: Date and time settings on pag
e 6-20.
Status attributes Status attributes may be displayed in the System Summary
page to indicate abnormal states.