User's Manual

System management Chapter 1 Product description
phn-2182_002v000
1-28
May 2011
Firmware upgrade
The management agent supports application firmware upgrade using the web-based
interface.
PTP 250 firmware images are digitally signed, and the ODU will accept only images
that contain a valid Motorola PTP digital signature. The ODU always requires a reboot
to complete a firmware upgrade.
Obtain the application firmware and this user guide from the support website
(http://www.motorola.com/ptp/support
) BEFORE warranty expires.
CAUTION
ODU firmware version must be the same at both ends of the link. Limited
operation may sometimes be possible with dissimilar firmware versions, but
such operation is not supported by Motorola.
The procedure for firmware upgrade is described in Upgrading firmware version on
pag
e 6-10.
Reset to factory defaults
The ‘reset to factory defaults’ feature provides a means to recover from serious
configuration errors, such as lost or forgotten passwords.
Use the reset plug (supplied in each PTP 250 ‘Link Complete’ or ‘End Complete’ kit) to
reset the unit to factory default configuration, including reset of the country that was
selected at first login. Following the procedure in Resetting to default configuration
(with count
ry reset) on page 7-26
Use t
he Save & Restore page to reset the unit to factory default configuration, without
resetting the country that was selected at first login. Follow the procedure in Resetting
to
default configuration (without country reset) on page 7-25.
Further reading on system management
For more information on system management, refer to the following:
• Chapter 6 Configuration and alignment de
scribes all configuration and alignment
tasks that are performed when a PTP 250 link is deployed.
• Chapter 7 Operation p
rovides instructions for operators of the PTP 250 web user
interface.