User's Manual
Table Of Contents
- PTP 250 User Guide
- Copyrights
- Safety and regulatory information
- Contents
- List of Figures
- List of Tables
- About This User Guide
- Chapter 1 Product description
- Chapter 2 Planning considerations
- Chapter 3 Legal information
- Chapter 4 Reference information
- Chapter 5 Installation
- Chapter 6 Configuration and alignment
- Chapter 7 Operation
- Chapter 8 Troubleshooting
- Testing link end hardware
- Testing when PoE LEDs do not illuminate correctly
- Testing after a lightning strike
- Test flowcharts
- AC LED is off
- AC LED is flashing
- PORT LED is off
- PORT LED is flashing
- Test Ethernet packet errors reported by ODU
- Test Ethernet packet errors reported by managed switch or router
- Test ping packet loss
- Test resistance at the PoE end of the drop cable
- Testing the radio link
- Testing link end hardware
- Glossary
Chapter 4
phn-2182_002v000
May 2011
4-1
Chapter 4 Reference information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
This chapter describes the reference information and regulatory notices that apply to
the PTP 250.
The following reference topics are contained in this chapter:
• Installation inventories on page 4-2 lists the components required for
PTP 250
installations, including ODUs, with Motorola part numbers.
• ODU specifications on pag
e 4-10 contains specifications of the outdoor unit
(ODU) that is supplied by Motorola for PTP 250 installations.
• Power supply unit specifications on
page 4-12 contains specifications of the PoE
power supply and PIDU that are supplied by Motorola for PTP 250 installations.
• Antenna specifications on page 4-14 co
ntains specifications of the antennas that
are approved by the FCC for use with the connectorized ODUs.
• Wireless specifications on page 4-19 cont
ains specifications of the PTP 250
wireless interface, including RF bands, channel width and link loss.
• Data network specifications on
page 4-21 contains specifications of the PTP 250
Ethernet interface.
• Compliance with safe
ty standards on page 4-22 lists the safety specifications
against which the PTP 250 has been tested and certified. It also describes how to
keep RF exposure within safe limits.
• Compliance with radio regulations on page 4-27 describes
how the PTP 250
complies with the radio regulations that are in force in various countries.
• Notifications on
page 4-33 contains notifications made to regulatory bodies for
the PTP 250.