User's Manual

PTP 250 User Guide Installation inventories
phn-2182_002v000
May 2011
4-5
Other standard components
In addition to ODU and PoE power supply kits, standard installations require the
components listed in Table 4-3.
Table 4-
3 Additional inventory for standard installations
Item Notes
Outdoor drop cable
CAUTION
Always use Cat5e cable that is gel-filled
and shielded with copper-plated steel.
Alternative types of drop cable are not
supported by Motorola.
Superior Essex BBDGe cable is available
from Motorola with the following lengths
and part numbers (other lengths are
available from Superior Essex):
‘1000 ft Reel Outdoor Copper Clad
CAT5E’. Motorola part number
WB3175.
‘328 ft (100 m) Reel Outdoor Copper
Clad CAT5E’. Motorola part number
WB3176.
RJ45 connectors
NOTE
The specified connectors, crimp tool and
die set are specific to Superior Essex
BBDGe cable (they may not work with
other types of cable).
‘Tyco/AMP, Mod Plug RJ45 Unscreened,
25 pk’. Motorola part number WB3177.
‘Tyco/AMP Crimp Tool’. Motorola part
number WB3211.
‘Tyco/AMP Die Set’. Available from Tyco,
part number 1-853400-0.
Cable glands
For protecting the drop cable entry points.
Glands are included in the ODU and LPU
kits, but additional glands may be
purchased from Motorola if required.
‘PTP SER EMC CABLE GLAND
(GROUNDING)’. Quantity 10. Motorola,
part number WB1811.
Cable hoisting grip
For hoisting the drop cable up to the ODU
without damaging the gland or RJ45 plug.
Not supplied by Motorola.