User's Manual Part 1
Table Of Contents
- Getting Started
- Product Architecture
- General Considerations
- Site Planning
- Installation
- Web Page Reference
- Fault Finding
- Specifications
- Lightning Protection
- OS-Gemini C
- FAQs
- Glossary
- Index
22
5.4 Installation Support
Online installation support and contact details for your regional support can be found at
http://www.orthogonsystems.com/
A Frequently Asked Questions (FAQ) section can be found in section 11.
5.5 Legal Disclaimer
IN NO EVENT SHALL ORTHOGON SYSTEMS BE LIABLE FOR ANY INJURY TO ANY
PERSONS OR ANY DAMAGE CAUSED DURING THE INSTALLATION OF THE ORTHOGON
SYSTEMS OS-Gemini PRODUCT.
5.6 Mounting the ODUs
The ODU mounting bracket is designed to ease installation by fixing the bracket to a wall or
pole and then bringing the ODU into position using a single bolt fixing. The ODU should be
mounted using the following steps ensuring that the cable entry is at the bottom:
5.6.1 Pole Mounting
Step 1: Mount the bracket to the pole.
Step 2: Mate the unit to the bracket together
and tighten the nut and bolt.
5.6.2
Wall Mounting
Select and use high quality wall fixings. Note that wind loading can be very high (many times
the weight of the unit) depending upon the location chosen. Also ensure that the wall can
withstand these high forces.