User's Manual Part 1
Table Of Contents
- Getting Started
- Product Architecture
- General Considerations
- Site Planning
- Installation
- Web Page Reference
- Fault Finding
- Specifications
- Lightning Protection
- OS-Gemini C
- FAQs
- Glossary
- Index
23
Step 1: Mount one half of the bracket to the
wall.
Step 2: Mate the two halves of the bracket
together and tighten the nut and bolt.
5.7 Connecting Up
5.7.1 Preparing The Cable — RJ45 connections
Cable can be purchased from your reseller or distributor in lengths up to 60m. (Note that the
maximum length between the IDU and ODU is 60m.) Those wishing to source their own cables
and connectors (see section 1.3.4 “Cables and Connectors” above) should follow the following
instructions along with the cable and connector suppliers instructions:
Step 1: Assemble gland Step on cable as
shown
Step 2: Strip the outer insulation