User's Manual Part 1
Table Of Contents
- Getting Started
- Product Architecture
- General Considerations
- Site Planning
- Installation
- Web Page Reference
- Fault Finding
- Specifications
- Lightning Protection
- OS-Gemini C
- FAQs
- Glossary
- Index
25
5.7.2 Making the Connection At The ODU
The following procedure describes how connection is made at the ODU. It is often easier to
carry out this procedure on the ground or a suitable surface prior to mounting the ODU.
Ensure no power is connected to the IDU or present on the cable before connecting the ODU.
Step 1: Assemble the cable as described
in 5.7.1 above
Step 2: Insert the RJ45 connector making
sure that the locking tab snaps home
Step 3: Screw in the body of the weather
proofing gland and tighten
Step 4: Screw on the clamping nut and
tighten