User's Manual Part 1

27
5.7.6 Making the Connection At The IDU
The ODU is connected to the IDU by means of a concealed RJ45 connector. The RJ45
connection has been placed inside the IDU to prevent the user inadvertently plugging other
equipment into the ODU RJ45 socket.
Warning: Plugging other equipment into the ODU RJ45 socket may damage the equipment due
to the non-standard Power-over-Ethernet techniques employed. Plugging the ODU into other
equipment may damage the ODU and/or the other equipment.
Step 1: Remove the cover by removing the four
cover fixing screws.
Step 2: Plug in the ODU to IDU Cable ensuring
that it snaps home
Step 3: Replace the cover
5.7.7 Mounting The IDU
This step is optional. Orthogon Systems recommends that you mount the IDU on a wall or
other suitable mounting surface. This prevents the unit from being knocked or kicked and can
help maintain link availability. Ensure that the reset switch can be accessed when mounting the
unit.