User's Manual Part 1

43
Wan Bad Rx Packets This displays the total number of corrupt packets the bridge has received
from the wireless interface. The number in (+nn) displays the number of corrupt packets
received since the last page refresh.
Lan Tx Packets This displays the total number of good packets the bridge has sent for
transmission by the local Ethernet interface. The number in (+nn) displays the number of
packets transmitted since the last page refresh.
Lan Rx Packets This displays the total number of good packets the bridge has received from
the local Ethernet interface. The number in (+nn) displays the number of packets received
since the last page refresh.
Packets To Internal Stack This displays the total number of good packets the bridge has
transmitted to the internal stack (e.g. ARP requests, PING requests, HTTP requests). The
number in (+nn) displays the number of packets transmitted since the last page refresh.
Packets From Internal Stack.This displays the total number of good packets the bridge has
received from the internal stack (e.g. ARP responses, PING replies, HTTP responses). The
number in (+nn) displays the number of packets received since the last page refresh.
PHY Code Word Error Counter The wireless link uses error correction techniques to enable
reconstruction of packets where there is a certain level of data corruption. This counter displays
the total number of packets that were so badly corrupted that they could not be reconstructed.
The number in (+nn) displays the number of packets received since the last page refresh
Receive Data Rate The data rate in the receive direction, expressed in Mbps and presented as:
max, mean, min, and latest histogram format.
The histogram is calculated over a one hour period. If the equipment has been running for less
than one hour then the histogram is calculated over the current elapsed time.
Transmit Data Rate The data rate in the transmit direction, expressed in Mbps and presented
as: max, mean, min, and latest histogram format.
The histogram is calculated over a one hour period. If the equipment has been running for less
than one hour then the histogram is calculated over the current elapsed time.
Wireless Link Availability Expresses the link availability as a percentage of time since the first
successful registration after a system restart. Expressed as a percentage to four decimal
places.