User's Manual Part 1

44
Code Word Error Ratio The ratio of detected codeword errors to the total number of
codewords since the last system reset.
Statistics Page Refresh Period The statistics page refreshes automatically according to the
setting entered here (in seconds).
Reset System Counters By pressing this button all counters in the system are reset to zero.
This not only affects this page for example the Elapsed Time Indicator is also reset.
Reset System Histograms All histograms are reset, and the calculation period is restarted.
6.3.3 Install Pages
These pages are used during system installation. There follows a description of the install
pages along with their use during the installation configuration process. The actual installation
process is described in section 5.7.9 “Aligning the ODUs” above.
All wireless links are shipped as paired units. They are pre-configured at the factory so that
they can be installed without any user supplying any configuration. Each wireless link is
shipped with a quick start guide. Attached to the quick start guide is a summary of the pre-
configured configuration data. Table 5 shows an example link configuration. The values
highlighted have been committed to the wireless units non-volatile storage.
Example OS-Gemini Configuration Data
For your convenience these two units have been pre-configured as a link
Units:
ODU serial number ODU serial number
0167800002BE 0167800002BF
Ethernet MAC address Ethernet MAC address
00:04:56:00:02:BE 00:04:56:00:02:BF
Configured as:
Master Slave
Target MAC address Target MAC address
00:04:56:00:02:BF 00:04:56:00:02:BE
Licence Key Licence Key
A471-FE88-428D-E1F3 534F-4F54-D1B0-E2DA
IP Address IP Address
10.10.10.11 10.10.10.10
Table 5 OS-Gemini Factory Configuration Values
The factory default configuration is written to the ‘semi-permanent’ configuration bank. The
semi permanent bank is used to hold all non-default values and allows the system
administrator to return the unit back to ‘factory defaults’.