User's Manual Part 1

45
6.3.3.1 Manually Configuring The Wireless Units
If the installer / system administrator wishes, they may modify the default installation
configuration. If only the IP addresses are incorrect it is recommended that the values are
changed via the configuration menu (Section 6.3.1). If any other parameters require
modification then it is recommended that the system administrator use the Installation Wizard.
A detailed description of the Installation Wizard follows:
The OS-Gemini operational software requires a licence key to enable the wireless bridging
capability and programs region code specific parameters in to the unit.
Figure 16 Licence Key Data Entry
A licence key is supplied programmed into each unit and can be found written on the
Configuration Data Summary Label which is attached to the Quick Install Guide. If
subsequently the licence key has been mislaid, replacement keys can be applied for online.
If a valid licence key is not detected in the unit’s non-volatile memory then the user is prompted
to enter a valid key. It should be noted that OS-Gemini units are now shipped as link pairs and
as such valid licence keys are entered during the production process. Hence the user should
never see the Software Licence Key screen (Figure 16).
To enter a licence key simply type or paste the licence key into the data entry box and click the
‘validate licence key’ button.