User's Manual

Table Of Contents

Step 1: Assemble the cable

as described in 5.5.2.1 above

Step 2: Insert the RJ45 connector making

sure that the locking tab snaps home

Step 3: Screw in the body of the weather

prooﬁng gland and tighten to ?? Nm

Step 4: Screw on the clamping

nut and tighten to ?? Nm

Should it be necessary to disconnect the IDU to ODU cable at the ODU this can be achieved by re-

moving the weather prooﬁng gland and depressing the RJ45 locking tab with a small screwdriver

as shown below:

Step 1: Disconnecting the ODU

Warning: Ensure that power is removed from the system at the IDU to prevent damage to the

ODU whilst breaking the connection.