User's Manual

37
maintenance. Master transmits until the link is made, Slave listens for its peer and only transmits
when the peer has been identified. figure 21 shows;
• Unit serial number is in Hex. 106 = MAC address 00:04:56:00:01:06
• Unit acting as Master.
Figure 21 Installation page 2 — Wireless Configuration
Step 4 figure 22 is for confirming and committing to non-volatile memory the settings just en-
tered.
Figure 22 Installation page 3 — Confirm Installation
Step 5 figure 23 is used for using the settings previously entered.
If the unit has been configured as the Master, the unit will restart with the transmitter transmitting
on a suitable channel having executed a scan for possible “Jamming” signals. The unit will
remain in this state until the matching Slave unit has completed its alignment and registration
process when the unit will take over control of the radio link and start the DFS functionality.