User's Guide
Table Of Contents
- Accuracy
- Copyrights
- Restrictions
- License Agreements
- High Risk Materials
- Contents
- Chapter 1: About This User Guide
- Chapter 2: Product Description
- Chapter 3: System Hardware
- Wireless nodes
- V1000 Client Node
- V3000 Client Node
- V5000 Distribution Node
- Radio mounting brackets
- Radio Accessories
- Radio External Interfaces
- Radio specifications
- Power supply units (PSU)
- V1000 power over Ethernet
- V3000, V5000 power over Ethernet
- V3000, V5000 DC power supply
- PSU part numbers
- PSU specifications
- Ethernet and DC cables
- Cable accessories
- SFP module kits
- Chapter 4: System planning
- Chapter 5: Legal and Regulatory information
- Definitions
- Acceptance of this agreement
- Grant of license
- Conditions of use
- Title and restrictions
- Confidentiality
- Right to use Cambium’s name
- Transfer
- Updates
- Maintenance
- Disclaimer
- Limitation of liability
- U.S. government
- Term of license
- Governing law
- Assignment
- Survival of provisions
- Entire agreement
- Third party software
- Compliance with safety standards
- Human exposure to radio frequency energy
- Chapter 6: Installation
- Safety
- Power lines
- Working at heights
- PSU
- Grounding and protective earth
- AC supply
- Powering down before servicing
- Primary disconnect device
- External cables
- Drop cable tester
- RF exposure near the antenna
- 60 GHz cnWave radios and mounting bracket options
- Installing the cnWave radio nodes
- Mount the radio on the mast
- Install the PSU
Chapter 2: Product Description
17
V3000 – High Gain Client node
60 GHz cnWave V3000 is featured with a 44.5 dBi high-gain antenna with beamforming. The client nodes can support up to 7.6
Gbps with channel bonding for both PMP and PTP configurations.
Figure 4 : V3000 – High Gain Client node
Frequency
57 to 66 GHz
Modulation BPSK to 16 QAM (MCS 0 to MCS 12) with ACM
Throughput
l
1.9 Gbps Uplink + 1.9 bps Downlink
l
3.8 Gbps Uplink + 3.8 Gbps Downlink with channel
bonding*
EIRP 60.0 dBm (EU and CEPT Countries Limited to 55 dBm)
Ultra high antenna gain with beam
forming
l
+/- 2.0 (Azimuth), +/- 1.0 (Elevation)
l
44.5 dBi Antenna Gain
Synchronization
IEEE-1588 TC*
Low latency
< 1 ms
Data interface
•
1 x 10 GE + PoE in (Passive)
•
1 x 1 GE + PoE out (802.3at)
•
1 x SFP+
Physical
•
346 x 414 x 344 mm (13.6 x 16.3 x 13.5 Inches), 2.5 kg (5.5
lbs.)
without clamp
•
-40°C to +60°C (-40 to +140
⁰
F)
*Available in future