User's Guide

Table Of Contents
Chapter 3: System Hardware
33
V3000, V5000 power over Ethernet
The V3000 Client Node and V5000 Distribution Node can be powered using power over Ethernet (PoE) at a nominal 56 V, using
the 5 Gbit/s 60 W PoE Injector (N000000L142A) as shown in Figure 21.
Figure 22: PoE power supply to V3000 or V5000
The PoE power injectors must be installed indoors, in a protected environment.
Note
The Gigabit Power Injector is supplied with the cnWave V1000 Client Node. Order part N000900L017A to
obtain spares.
Warning
Always use an appropriately rated and approved AC supply cord-set in accordance with the regulations of the
country of use.