User's Guide

Chapter 6: Installation
58
60 GHz cnWave radios and mounting bracket options
Mounting bracket options
The 60 GHz cnWave series supports eight mounting bracket options. Select the optimum mounting bracket arrangement
based on the ODU type and the choice of wall or pole mounting. The wall mount plate for V1000 is included with the ODU.
Order the remaining brackets separately.
Table 22 :ODU mounting bracket part numbers
Bracket Pole diameter ODU
variants
Bracket part number
V1000 Wall Mount Wall mount V1000 Included with V1000
V1000 Pole Mount 40 mm to 77 mm (1.6 inches to 3.0
inches)
V1000 Included with V1000
Adjustable Pole Mount 40 mm to 77 mm (1.6 inches to 3.0
inches)
V1000 N000900L022A
Tilt Bracket Assembly 40 mm to 77 mm (1.6 inches to
3.0 inches)
V3000,
V5000
N000045L002A
Tilt Bracket Assembly with band
clamps
90 mm to 230 mm (3.6 inches
to 9.0 inches)
V3000,
V5000
N000045L002A + third-
party band clamps
Wall Mount Bracket Wall mount V5000 C000000L136A
Pole Mount Bracket 25 mm to 77 mm (1.0 inches to
3.0 inches)
V5000 C000000L137A
Precision Bracket 25 mm to 77 mm (1.0 inches to
3.0 inches)
V3000 C000000L125A
Installing the cnWave radio nodes
To install the radio, use the following procedures:
1. Attach ground cables to the radio
2. Mount the radio on the mast
3. Ground the radio
Attach ground cables to the radio
1. Fasten the ground cable to the radio grounding point using the M6 lug.