User's Guide

Chapter 6: Installation
62
V5000 wall mount bracket
1. Install the mounting plate of the Wall Mount Bracket securely on a vertical wall, using suitable fixings.
Note that fixing hardware is not supplied with the Wall Mount Bracket.
2. Fix the bracket body to the back of the radio using the four short M6 bolts, ensuring that the arrow in the plate points
towards the top of the radio. Tighten the four bolts to a torque setting of 5.0 Nm (3.7 lb ft) using a 13 mm spanner or socket.
Insert the four short M8 bolts into the sides of the bracket body.
3. Fit the bracket body to the mounting plate by positioning the short bolts into the open-ended slots.
Tighten the bolts to a torque setting of 5.0 Nm (3.7 lb ft) using a 13 mm spanner or socket.
V5000 pole mount bracket
1. Pass the long screws through the bracket body. The screws locate in the recess in the bracket.
2. Fit two flanged nuts to the long screws on the back of the bracket. Tighten using a 13 mm spanner.
3. Fix the bracket to the back of the radio using the four short M6 bolts, ensuring that the arrow in the plate points towards
the top of the radio. Tighten the four bolts to a torque setting of 5.0 Nm (3.7 lb ft) using a 13 mm spanner or socket.
4. Attach the pole-mount bracket to the pole using the clamp and the remaining flanged nuts. Adjust
azimuth and tighten the nuts to 10 Nm (7.4 lbft) using a 13 mm spanner.