User's Guide

Chapter 6: Installation
65
8
Nm (3.7 lb ft) using a 13 mm spanner or socket.
10. Attach the precision bracket to the pole using the clamp and the remaining flanged nuts. Adjust azimuth approximately
and tighten the nuts to 10 Nm (7.4 lbft) using a 13 mm spanner.
11. Align the antenna elevation using the fine elevation adjuster.
12. Align the antenna azimuth using the fine azimuth adjuster.
13. Lock the antenna alignment by tightening the five Nyloc nuts (see Steps 5 and 8) to 10 Nm (7.4 lbft) using a 13 mm spanner
or socket.