User's Manual

CAMBIUM NETWORKS
210
CONFIGURING RADIUS PARAMETERS ON AP
Figure 61 AP Radius configuration
To configure Radius parameters on AP, follow these steps:
1.
Open the GUI and login as admin.
2. Navigate to
Configure
->
Security
->
Wireless Security.
3. Change the value to RADIUS.
4. Add IP Address of your RADIUS Server in the Radius Servers table.
5. Also configure Port (you may use default 1812) and Secret which has to be the same as in
clients.conf
file.
6. Click
Save
, to keep the changes.

Summary of content (150 pages)