Specification Sheet

ePMP™ Bridge-in-a-Box Specification Sheet
Cambium Networks, Ltd.
3800 Golf Road, Suite 360
Rolling Meadows, IL 60008
www.cambiumnetworks.com
Join the conversation: community.cambiumnetworks.com
Bridge-in-a-Box
Plug-n-Play Outdoor Wireless Ethernet Bridge
ePMP Bridge-in-a-Box is a pre-paired Point-to-Point (PTP)
link comprised of two ePMP Force 180 devices designed to
extend networks between two locations (up to 10 miles
apart).
The Bridge-in-a-Box solution may be quickly installed to:
 Extend a local network to a remote building
 Extend your Wi-Fi link to a new location
 Provide a cost-effective solution to backhauling
CCTV networks
 Support any application requiring network
extension!
Bridge-in-a-Box Specifications
Feature
Specification
Wireless Standard
ePTP proprietary protocol.
Supports longer ranges, lower
latency, and greater performance.
Optional Standard Wi-Fi mode of
operation available.
Wired Interface
Gigabit / Fast Ethernet
Functions
Traffic prioritization using ePMP
QoS (Quality of Service), WEP
security.
Power
24-56V PoE at device
Radio Transmit Power
Up to 30 dBm
Environmental
Outdoor IP55
-4 to 131 deg F (-20 to +55 deg
C)
Antenna
16 dBi integrated antenna
Mounting
Flexible pole mount. Supports
diameters from 1-3 inches (2.5 –
7.5 cm)
Security
AES128 data encryption and
RADIUS-based authentication
Expected performance based on Line
of Sight (LOS) between the two units.
Trees, buildings, and other
obstructions will result in lower range
and performance.
1
4.2
6.6
11.4
0 2 4 6 8 10 12
200
100
50
20
Range (mi)
Throughput (Mbps)
Line of Sight Range