Specification Sheet

ePMP™ FORCE 180 SPECIFICATION SHEET
ePMP
TM
ePMP FORCE 180 SS 092315
Specifications
PRODUCT
Model Number MODEL NUMBER C058900P072A (US/FCC), C050900P071A (EU/ROW),
(See below for a complete list of part numbers for ordering)
SPECTRUM
Channel Spacing Configurable on 5 MHz increments
Frequency Range 5 GHz: 4910 – 5970 MHz (exact frequencies as allowed by local regulations)
Channel Width 5 | 10 | 20 | 40 MHz
INTERFACE
MAC (Media Access Control) Layer Cambium Proprietary
Physical Layer 2x2 MIMO/OFDM
Ethernet Interfaced 10/100/1000BaseT, Compatible with Cambium PoE pinouts (V+ = 7 & 8, Return = 4 & 5) and Standard PoE pinouts (V+ = 4 & 5,
Return = 7 & 8)
Protocols Used IPv4, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping
Network Management HTTPs, SNMPv2c, SSH
VLAN 802.1Q with 802.1p priority
PERFORMANCE
ARQ Yes
Nominal Receive Sensitivity (w/FEC) @200MHz
Channel
MCS0 = -93 dBm to MCS15 = -72 dBm (per branch)
Nominal Receive Sensitivity (w/FEC) @40MHz
Channel
MCS0 = -90 dBm to MCS15 = -69 dBm (per branch)
Modulation Levels (Adaptive) MCS0 (BPSK) to MCS15 (64QAM 5/6)
Quality of Service Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and
Station Priority
LINK BUDGET
Transmit Power Range -17 to +30 dBm (combined, to regional EIRP limit) (1 dB interval)
Integrated Antenna Peak Gain 16 dBi
Maximum Transmit Power 30 dBm combined (subject to regional regulatory restrictions)
PHYSICAL
Antenna Connection Integrated Antenna
Surge Suppression 2 Joule Integrated
Environmental IP55
Temperature -30°C to +60°C (-22°F to +140°F)
Weight 0.50 kg (1.1 lb.) (includes mounting bracket)
Wind Survival 145 km/hour (90 mi/hour) with antenna
Dimensions (h x w x d) 12.4 x 25.1 x 11.9 cm (4.9 x 9.9 x 4.7 in) – with mounting bracket attached
Pole Diameter Range 1 – 1.6 in (2.5 – 4.1 cm) with included clamp ; up to 2.25 in (5.7 cm) with larger clamp
Power Consumption 10 W Maximum, 5 W Typical
Input Voltage 10 to 30 V