Users Manual

Chapter 4: Using the Device Management Interface 122
Attention
If a device firewall rule is added with Action set to Deny and Interface set to LAN
or WAN and no other rule attribute is configured, the device will drop all Ethernet
or wireless traffic, respectively. Ensure that all firewall rules are specific to the
type of traffic which must be denied and that no rules exist in the devices with the
only Action set to Deny and Interface set to LAN or WAN. To regain access to the
device, perform a factory default.
Figure 25 Configuration > Security page (Access Point Mode)
Figure 26 Configuration > Security page (Subscriber Module Mode)