Users Manual

Chapter 4: Using the Device Management Interface 138
Attribute Meaning
Downlink /
Uplink
measured at the AP (second value).
SNR (dB)
Downlink /
Uplink
Indicates the estimated SNR of the AP at the SM (first value) and the SRN of the SM
measured at the AP (second value).
MCS
Downlink /
Uplink
(Access
Point Mode)
Current MCS at which the downlink (first value) and uplink (second value) are operating.
Downlink
Quality
(Access
Point Mode)
The downlink quality based on the current MCS and PER (Packet Error Rate) for this SM.
Downlink
Capacity
(Access
Point Mode)
The downlink capacity based on the current DL MCS with respect to the highest
supported MCS (MCS15). The downlink capacity based on the current DL MCS with
respect to the highest supported MCS (MCS15).
MU- MIMO
Gain
Indicates if MU-MIMO is supported by the subscriber and the MU-MIMO gain achieved by
MU-MIMO capable subscribers.
Model Name Model of Subscriber Module
Add As
Preferred
(Subscriber
Module
Mode)
Click the Add button to add the Access Point to the Preferred Access Points List
under Configuration>Radio.
SSID
(Subscriber
Module
Mode)
The SSID of the visible Access Point.
MAC
Address
(Subscriber
Module
Mode)
The MAC address of the visible Access Point.
Frequency
Carrier
(MHz)
(Subscriber
The current operating frequency of the visible Access Point.