Datasheet

I BMR (Balanced Mode Radiator) full range driver
combining bending wave technology for higher
frequencies, with pistonic driver movement for lower
frequencies
I Incredibly wide dispersion from the BMR driver virtually
eliminates any ‘sweet spot’ problem
I BMR technology offers wide frequency response
from a single driver, allowing for optimum integration
with a subwoofer
I Acoustically damped thermo polymer cabinet construction
ensuring a rigid speaker cabinet to disperse colouration
I Scratch resistant high gloss lacquer available in black
or white finishes
I Optional table top or floor stands available
Minx Satellites Specifications
www.cambridge-audio.com
Sensitivity (SPL) 85dB (2.83 Vrms input)
Frequency response 120Hz-20kHz
Impedance 8 Ohms compatible
Recommended Amp Power 25-200W*
Drivers 1 x 2.25" BMR
Dimensions (H x W x D) 78 x78 x 85mm
(3.1 x 3.1 x 3.3”)
Weight 0.42kg (0.93lbs)
Finishes High gloss black
High gloss white
Sensitivity (SPL) 87dB (2.83 Vrms input)
Frequency response 120Hz-20kHz
Impedance 8 Ohms compatible
Recommended Amp Power 25-200W*
Drivers 1 x 2.25" BMR
1 x 2.25" longthrow woofer
Dimensions (H x W x D) 154 x78 x 85mm
(6.0 x 3.1 x 3.3”)
Weight 0.85kg (1.88lbs)
Finishes High gloss black
High gloss white
Min11 specifications Min21 specifications
Min11 Min21
*Using a high powered amplifier lower down its volume scale results in lower distortion and better sound. Of course if you hear a distorted sound or mechanical ‘crack’ as the speakers hit their end stops, you are playing the
speakers too loud and this may cause damage. With an AVR the Min11/21 speakers should be set to ‘small’ with a crossover frequency of 140Hz. In this configuration, power handling is considerable increased.