User`s manual

851Wazur
ENGLISH
9
Bi-amped dual mono connections
Bridged dual mono connections
The 851W features Mono and Bridged Mono settings that allow two (or
more) 851Ws to be used as mono-blocs for high end systems. Below is
an example using two 851W’s in Bridged Mono with an 851E.
In Bridged Mono mode each 851W drives one speaker across its output
channels acting as a 500W mono amplier instead of a 200wpc stereo
one. One 851W drives the left speaker and the other the right.
Note: Unbalanced connections can also be used.
Important 851W settings
Only use the Left Inputs on the 851W for Bridged operation.
In this conguration the Stereo/Mono switch on the 851W must be set to
‘Mono’ and the Mono mode switch must be set to ‘Bridged’.
The 851W features Mono and Bi-Amped Mono settings that allow two (or
more) 851Ws to be used as mono-blocs for high end systems. Below is
an example using two 851Ws in Bi-Amped Mono with an 851E.
In Bi-Amped Mono mode each 851W drives one speaker.
Note: Unbalanced connections can also be used.
Important 851W settings
Only use the Left Inputs on the 851W for Bi-Amped operation.
In this conguration the Stereo/Mono switch on the 851W must be set to
'Mono' and the Mono mode switch must be set to 'Bi-Amp'.
The metal strip connecting the low-frequency terminals to the high-
frequency loudspeaker terminals must be removed.
Stereo
Mono
Bi-Amp
Bridged
Bridged
Use Left Input for
Bridged / Bi-Amp
operation.
Mono Mode
Stereo
Mono
Bi-Amp
Bridged
Bridged
Use Left Input for
Bridged / Bi-Amp
operation.
Mono Mode
851W
851E
851W
Stereo
Mono
Bi-Amp
Bridged
Bridged
Use Left Input for
Bridged / Bi-Amp
operation.
Mono Mode
Stereo
Mono
Bi-Amp
Bridged
Bridged
Use Left Input for
Bridged / Bi-Amp
operation.
Mono Mode
851W
851E
851W