AXA25 INTEGRATED AMPLIFIER
Contents IMPORTANT SAFET Y INSTRUCTIONS 3 RE AR PANEL CONNECTIONS 5 This guide is designed to make installing and using this product as easy as possible. Information in this document has been carefully checked for accuracy at the time of printing; however, Cambridge Audio’s policy is one of continuous improvement, therefore design and specifications are subject to change without prior notice.
AXA25 Important safety instructions For your own safety please read the following important safety instructions carefully before attempting to connect this unit to the mains power supply. They will also enable you to get the best performance from and prolong the life of the unit: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.
SUPPLIER’S DECLARATION OF CONFORMITY (SDOC) Equipment: Integrated Amplifier Model: AXA25 Trademark: Cambridge Audio This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The responsible party in US: Company name: Audio Partnership LLC Address: 1913 N Milwaukee Ave.
AXA25 Rear panel connections Left Loudspeaker Right Loudspeaker Impedance 8 ohms USB 5V 500mA A1 A2 A3 A4 Designed & Engineered in Great Britain Assembled in China Loudspeaker Terminals Power Rating: 220–230V AC ~ 50/60Hz Max Power Consumption: 180W AXA25 Integrated Amplifier Power AC 3 A4 A3 A2 A1 1 1 Rec Out 5 Right Loudspeaker 2 Left Loudspeaker 4 4 AUDIO INPUTS (A1-A4) These inputs are suitable for any ‘line level’ source equipment such as the audio outputs of CD players, stre
Connections LOUDSPEAKERS Check the impedance of your speakers. You can use types with an impedance of 8 Ohms. The red coloured speaker terminals are positive (+) and the black speaker terminals are negative (-). Make sure correct polarity is maintained at each speaker connector or the sound can become weak and “phasey” with little bass. USING BARE WIRE CONNECTIONS USING BANANA PLUGS Prepare the speaker cords for connection by stripping off approximately 10mm (3/8”) or less of the outer insulation.
AXA25 Technical specifications Power output THD (unweighted) 25 watts (into 8Ω) <0.015% @ 1kHz, 80% of rated power <0.15% 20Hz – 20kHz, 80% of rated power <0.1% 20Hz – 20kHz @ 10W Frequency response (-3dB) (-3dB) 10Hz - 30kHz S/N ratio (ref 1W) >82dB (unweighted) Input impedances 32k ohms Power Amp damping factor > 100 Max. power consumption 180W Bass/Treble controls Shelving, ultimate boost/cut +/- 5.5dB @ 20Hz and 20kHz Standby power consumption <0.5W Inputs: 4x RCA, , 1 x 3.
W W W.C A M B R I D G E AU D I O.C O M Gallery Court, Hankey Place London se1 4bb United Kingdom Cambridge Audio is a brand of Audio Partnership Plc. Registered in England No.
