Operation Manual

6
Front panel controls
azur 351C
1
Standby/On
Switches the unit between Standby mode (indicated by dim power LED)
and On (indicated by bright power LED). Standby is a low power mode
where the power consumption is less than 0.5 Watts. The unit can be left
in Standby mode when not in use.
Note: For convenience, the player can be programmed to automatically
enter Standby mode after a period of inactivity. To enable this feature,
see “Using the set-up menu” on page 9.
2
Infrared sensor
Receives IR commands from the supplied remote control. A clear,
unobstructed line of sight between the remote control and the sensor
is required.
3
Open/Close
Allows you to open and close the disc tray. After placing a CD in the tray,
press Open/Close to close the tray.
4
Play/Pause (/)
Plays the disc and pauses play.
5
Stop 
Stops the CD playing.
6
Skip/Scan ( )
Enables you to skip between and search within tracks. Press briey to
skip a track. Press and hold to scan through a track.
Display functions
1
Play
Illuminated during disc playback.
2
Pause
Indicates that disc playback has been paused.
3
Display
Alpha-numeric characters which display playback information. On
inserting a disc, the CD player will take a few seconds to read the Table
of Contents (TOC) information from the disc. The display will then show
the number of tracks on the CD and the total length of the CD.
If the CD incorporates CD-text, the name of the album will scroll once
(the number of tracks remains stationary throughout). Once playback
of an individual track begins, the track number, total number of tracks
and play-time will be displayed. On a CD containing CD-text, the track
name will scroll once. Pressing the
button on the remote control will
re-display the CD-text.
4
Random
Indicates random playback mode.
5
Remain
Illuminated when displaying time remaining on track or disc.
6
Repeat All/Track
Illuminated when ‘Repeat Track’ or ‘Repeat All’ is selected.
1 2 3 4 5 6
1 2
3
4 5 6
Auto Play Auto Power Down
OffOn
Off 30min60min 120min