Operation Manual

ManualsBrandsCambridge audio ManualsAudioAZUR 851D

851Dazur

ENGLISH

The 851D is supplied with a Cambridge Audio

System remote control that operates both this

upsampling DAC/digital pre-amp and Cambridge

Audio 851 series and Stream Magic products.

Insert the supplied AAA batteries to activate.

The functions relevant to the 851D are as follows:

1. Standby/On

Switches the 851D between On and Standby mode.

2. Mute

Mutes the audio on the pre-amplier. The mute

mode is indicated by MUTE appearing and the

volume level being replaced by two ashing dashes

in the display. Press again to cancel mute.

3. Bright

Adjust the backlight of the front panel display;

bright, dim or off.

4. Headphone volume

Increase or decrease the volume of the headphone

output.

5. Home

Press to return to main menu.

6. Volume

Increase or decrease the volume of the pre-

amplier output.

7. Back

Press to go back to the previous menu item.

8. Navigation buttons

Press to navigate around the main menus.

9. Illuminate button

Press to illuminate the buttons on the remote.

10. Source buttons

D1-D6: Press the corresponding source button to

select the digital source inputs.

Bluetooth (BT100): Press to select bluetooth

source input using the BT100 dongle. To pair

devices, press and hold for a few seconds to initiate

the pairing function.

Note: Disconnect one device before pairing

another, or turn the Bluetooth function off from the

currently connected device before pairing another.

USB (PC): Press to select the USB audio source

input.

See later sections for more details.

11. Trigger

Press to override the current trigger output state, for example to turn a

power amplier or projector on or off.

12. Filter/ø

Press to cycle through different digital lter phase modes: Linear,

Minimum, Steep, Linear inverted, Minimum inverted and Steep inverted.

The corresponding LED will light up to show which lter has been

selected. These affect the analogue outputs only. See later section for

more details.

The following functions are

available via USB and Bluetooth

playback.

Note: These functions will depend on the

audio software installed on the host personal

computer or paired devices.

13. Play / Pause

Press the relevant button to play or pause a

track.

14. Skip

Right Skip () – Press once to skip forward

by one track on the playlist.

Left Skip () – Press once to skip backward

by one track on the playlist.

Remote control