Owner's Manual

Important safety instructions
For your own safety please read the following important safety
instructions carefully before attempting to connect this unit to the mains
power supply. They will also enable you to get the best performance from
and prolong the life
of the unit:
1.
Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5.
Do not use this apparatus near water.
6.
Cle~m only with a dry cloth .
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers)
that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement
of the obsolete outlet.
10 . Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles and the point where they exit from
the apparatus.
11 . Only use attachments/accessories specified by the manufacturer.
12 . Use with only the cart, stand, tripod, bracket, or ®
table specified by the manufacturer, or sold with the • ~
apparatus. When a cart is used, use caution when ~
moving the cart/ apparatus combmat1on to avo1d InJUry ~
from tip-over.
13 . Unplug this apparatus during lightning storms or when unused for
long periods of time.
14 . Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way , such
as the power-supply cord or plug having been damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or
has been dropped.
WARNING
-
To reduce the risk of fire or electric shock, do not expose this unit to
rain
or moisture.
- Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
The unit is of Class 1 construction and must
be connected to a mains
socket outlet with a protective earthing connection.
The unit must be installed in a manner that makes disconnection of
the mains plug from the mains socket outlet (or appliance connector
from the rear
of the unit) possible. Where the mains plug is used as the
disconnect device, the disconnect device shall remain readily operable.
Only use the mains cord supplied with this unit.
Please ensure there is ample ventilation (at least 10cm clearance all
round).
Do not put any objects on top of this unit. Do not situate it on
a rug or other soft surface and do not obstruct any air inlets or outlet
grilles. Do not cover the ventilation grilles with items such as newspapers,
tablecloths, curtains, etc.
This unit must not
be used near water or exposed to dripping or splashing
water or other liquids.
No objects filled with liquid, such as vases, shall
be placed on the unit.
azur
851C
The lightning flash with the arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of un-insulated
'dangerous voltage· within the product's enclosure that may
be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence
of important operating and maintenance
instructions
in the service literature relevant to this appliance.
WEEEsymbol
The crossed-out wheeled bin is the European Union symbol
for indicating separate collection for electrical and electronic
equipment. This product contains electrical and electronic
- equipment which should be reused, recycled or recovered
and should not
be disposed of with unsorted regular waste.
Please return the unit or contact the authorised dealer from whom
you
purchased this product for more information.
(
~ CEmark
~ This product complies with European Low Voltage (2006/95/
EC) , Electromagnetic Compatibility (2004 / 108/EC) and
Environmentally-friendly design of Energy-related Products
(2009/125/
EC) Directives when used and installed according to this instruction
manual.
For continued compliance only Cambridge Audio accessories
should
be used with this product and servicing must be referred to
qualified service personnel.
C-Tick mark
This product meets the Australian Communications
Authority's Radio communications and
EMC requirements.
Gost-R Mark
This product meets Russian electronic safety approvals.
FCC regulations
NOTE : THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
TO THIS EQUIPMENT . SUCH MODIFICATIONS COULD VOID THE USER
AUTHORITY TO OPERATE THE EQUIPMENT .
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against
harmR.II interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee
that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or
more of the following measures:
-
Re -orient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/
TV technician for help.
3
I