DVD player User’s manual - supplement 2 COMPACT DIGITAL AUDIO Open/Close Play/Pause Stop Skip/Scan ENGLISH DVD89
Contents Using the DVD setup menu system............................................................3 Setting up the player: Basic........................................................................3 Determine your display type.......................................................................4 Use the best available audio connection...................................................5 Connections for most CD or DVD playback................................................
Using the DVD setup menu system Setting up the player: Basic In many places of this guide, the DVD player’s Setup Menu needs to be adjusted to match your specific audio/video configuration. To access the DVD player’s Setup Menu simply press the SETUP button on the remote control when the disc is stopped.
Determine your display type For best performance, your DVD89 player must be correctly configured for playback even before the first disc is inserted. This is done under General Setup Page > TV Display in the Setup Menu. If you have a 4:3 or standard definition screen as pictured above, select one of these options: • 4:3 Pan/Scan – 4:3 TV Pan and Scan. Choose when the display is 4:3. Both sides of a widescreen image are clipped (you lose about 30% of the picture). • 4:3 Letterbox – 4:3 TV Letterbox.
DVD89 ENGLISH Use the best available audio connection Connections for most CD or DVD playback Rear Panel Off GOOD BEST Audio In Coaxial In Connect ONE of these digital audio cables: Coaxial S/PDIF or Optical S/PDIF Speaker Setup Page > Downmix* settings: Left/Right, Stereo, V.Surr, 5.1CH *does not affect digital player outputs.
Connections for non-Dolby Digital/DTS Receivers, DVD-Audio and SACD SACD or DVD-Audio playback To utilize SACD or DVD-Audio you will also need to connect six (6) analogue RCA-style cables from the DVD89 player to your receiver’s multi-channel analogue inputs. These multi-channel outputs will also support playback of DVD-Audio, DTS, Dolby Digital and stereo sources.
DVD89 General setup page ENGLISH Setting up the player: Advanced Setup menu options The following is an advanced tour of the Setup Menu options which enables control over how your DVD player functions in various situations and with various program material and hardware. The DVD89 player comes with a “safe” default configuration, so you should get performance out of your player even if you don’t touch the Setup Menu system.
Speaker setup page 4. Rear Speaker: To set the sound filtering control for the rear speakers. The options are: • Large – Choose if the rear/surround speakers are full range (reproduce down to at least 40Hz) and if you do not have a subwoofer. Bass frequencies are passed to the rear speakers. • Small – Choose if the rear/surround speakers are not “full range” speakers (almost all speakers qualify to be “small”). Bass frequencies are not passed to the rear speakers to reduce possible distortion. 1.
DVD89 • Press the UP/DOWN ARROW buttons to select the first speaker to configure. Example channel delay adjustment: • Measure the distance (in inches) from that speaker to the listening position. If it is LESS than the distance to the Front Left speaker, enter the difference (as close as possible) in inches using the LEFT/RIGHT ARROW buttons. If it is GREATER than the distance to the Front Left speaker, then leave the value at 0.
Audio setup page 6. Pro Logic II: Taking a step further than most DVD players, the OPPO DVD player allows you to configure Dolby Pro Logic II to expand 2channel source audio into full 5-channel surround sound. Note: Pro Logic II functionality is effective only when Speaker Setup Page > Down-mix is set to “5.1ch” and SPDIF Output is set to “Raw”. • Press the SELECT button to enter the Pro Logic II Config page. • Press the LEFT ARROW button to exit the Pro Logic II Config page. 1.
DVD89 Video setup page ENGLISH Audio setup page continued 7. Dolby Digital Setup: To configure the Dolby Digital decoder, press the SELECT button to enter the Dolby Digital Setup page and press the LEFT ARROW button to exit the Dolby Digital Setup page. 1. Sharpness: To set the sharpness of video output. Sharpness level can be set with the following options: A. Dual Mono: To choose the output for Dolby Digital discs encoded with two independent audio channels, such as bilingual programs.
Preference page 6. Parental Control: Sets parental control ratings in order to prevent minors from watching inappropriate contents. This function requires that the disc being properly rated and encoded. • Press the SELECT button to bring up the rating selection menu. • Press the UP/DOWN ARROW buttons to select the rating to allow (G/PG/PG 13/PGR/R/NC17/ADULT). The selected rating and below will be allowed, and any rating above the selected will be blocked. • Press the SELECT button to confirm the selection.
Cambridge Audio Gallery Court Hankey Place London SE1 4BB England www.cambridge-audio.