Manual

11
Remote control
Last updated: July 12, 2022 01:13. Revision #5136
The CXA remote control handset duplicates the front panel control functions and is also able to control other CX series products. The supplied AAA
batteries must be fitted before the remote control can be used. The handset buttons function as described below:
1. Brightness - Alters the brightness of the CXA display lights. There are
two brightness levels and an option to switch off the backlight.
Note: When the CXA display lights are selected to be off, selecting any
of the functions will briefly switch on the lights to show the change.
2. Mute - Press to mute or unmute the loudspeakers, pre-out, sub, and
the headphone outputs.
The light will flash on the front of the unit to show the outputs are muted.
3. Standby/On - Switches the CXA between On and Standby mode.
4. Sources - Used to select the source inputs.
Note: For the CXA81, the A1 button has the double function of selecting
the balanced or unbalanced A1 input, and will toggle between the two
inputs when double pressing. The MP3 source can only be selected when
there is a jack connected to the input.
5. Volume up/down - Volume level adjustment.
Note: If the remote control will not function, please check that the
batteries have not expired, and that there is nothing blocking the front
panel IR receiver.