Manual

2. For the highest quality play back, ensure that the CXA is set to USB 2.0 mode.

See the ‘Setup Menu’ section below for a guide on how to change USB mode. (The default conﬁguration is USB Audio Class 2)

3. Download the Windows USB 2.0 driver.

See the “How do I install the latest USB Audio driver” section below, for a guide on how to download the USB driver.

4. Select the USB Audio source on the front panel of the CXA.

You can do this by pressing the Bluetooth/USB button, which will toggle between the two inputs. The USB Audio is shown by the symbol being lit

orange.

5. Choose the CXA as your output speaker via your Windows PC’s sound settings.

Note: To ensure you are getting the highest quality play back possible, ensure that the maximum sample rate for the CXA is selected, up to 384

kHz.

This can be done via your Windows PC by selecting ‘Control Panel’ > ‘Sound’ > ‘Speaker Properties’ > ‘Advanced’ Tab, and selecting the maximum

sample rate and bit depth from the drop down menu.

How to install the latest USB audio driver for the CXA61/81

To install the latest USB Audio driver for your CXA61/81, please follow the steps below:

1. Download the correct driver for your Windows operating system from -

https://casupport.cambridgeaudio.com/product/4831129-CXA6181/message/asjc3o7wl07xm1ht-Windows-Audio-USB-Class-2-Driver

2. Unzip the downloaded folder, and double click on the application ﬁle to run the installer. This is highlighted in the image below.

3. Run the installer, and follow the instructions.