Manual

20
Setup menu
Last updated: June 6, 2022 08:54. Revision #4888
To enter the setup menu
1. Put the CXA in standby mode.
2. Whilst in Standby mode, press and hold the Speaker A/B button until the A/B lights flash alternatively and the sources A1-A4 light up.
Note: Press the Speaker A/B button once to leave the Setup menu and place the CXA back into Standby mode.
See below source buttons for setup configuration:
Note: Button selected is represented by Blue light.
Auto power down (APD)
A1 off – Disables the APD (Auto power down) function.
A1 on – Sets the APD time to 20 minutes.
Note: Auto power down is a power down function that automatically switches the CXA into standby mode if there is no audio. The APD time
represents the amount of time required for there to be no audio before the CXA is automatically put into the standby mode.