Manual

21
Clipping function
A3 on – Clipping function enabled. The volume nudges down if signal clipping is detected.
A3 off – Clipping function is disabled.
USB mode
A4 on – Puts the CXA in USB Audio Class 2 mode.
A4 off – Puts the CXA in USB Audio Class 1 mode.
Notes:
To save the setup settings and exit the setup menu, press the Speaker A/B button.
Pressing the Standby/On button while in the setup menu will exit this setup menu and will not save the setup settings.
Factory reset
A factory reset can be performed to restore the CXA to its original factory settings:
1. Whilst the CXA is in standby mode, press and hold the speaker A/B button;
2. Then when the A/B lights flash, press D1, D3, USB, D2 in a U shape sequence.