Manual

25
CXA with CXN
Note: Without using the StreamMagic app to control the CXA.
When turning the CXA on/off, this will also turn the CXN on/off. Connect the CXA control bus out to CXN in.
CXA with CXN and CXC
When turning the CXN on/off, this will turn the CXA and CXC on/off.
With all three CX devices, connect the CXN Control Bus out to CXA Control Bus in. Then connect the CXA Control Bus out to CXC Control Bus in.
Note: Do not loop back from the CXC Control Bus out to the CXN Control Bus in.
Control Bus will also need to be enabled and set to 'Amplifier' within the CXN device settings in the StreamMagic app, once the app has been
connected to the CXN.
Note: The CXA, CXN and CXC all have an Auto Power Down (APD) function. If APD is enabled and one of the devices is switched on but inactive, the
device will automatically power down after the selected APD time. This will then switch off all the other connected devices, due to the Control Bus
connection.