ASSEMBLY INSTRUCTIONS WICKER ROCKING CHAIR IT-130960 CUSTOMER SERVICE INFORMATION Please email us at for assembly tips, report damage, or request parts. For faster response, please write down item number, code for missing parts, attach the purchase receipt and picture of damaged parts.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the Rocker. 2. To avoid damage, assemble the rocker on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the rocker is used. 4. This rocker is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. TOOLS REQUIRED 1. 8" Philips screwdriver (Not provided).
Attached each rocker (E) to Right and Left Side Frame {A18A2) as picture shown, connecting front of rockers to front legs first then the back of rockers. Secure connections with 1 3/4" Bolts (G). Install Head Back Support (B), Back support (C) and Seat (D) into corresponding holes of Right Side Frame (A1). Attach the Left Side Frame (A2) onto Apron (B), Back support (C) and Seat {D). Secure Left Side Frame (A2) using 1 1/4" Bolts (F), as shown.
MAINTENANCE ‘Wood is a living material that continues to respond to climate condition even after being made into a piece of furniture. After assembly rub the furniture with soft rag to remove any residual dust. Wood is a natural material whose appearance will change when left outdoors. This product has been treated prior to leaving the factory. To clean, use mild soap and warm water.
1 year Limited Warranty The furniture is warranted to be free from defects in material and workmanship of the original product when purchased from one of our authorized dealers. If a product fails and is under the terms of our limited warranty, the item will be replaced, usually for a small fee. In the case of discontinued models, an item of similar quality and style will be offered to the customer. e 1 year limited frame warranty Frames are warranted to be free from defects in material and workmanship.