GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the swing. 2. To avoid damage, assemble the swing on a non-abrasive surface such as carpet. 3. Make sure all bolts, screws and nuts tightly fastened before the table is used. 4, This swing is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts, screws and nuts. TOOLS REQUIRED 1. 8" Philips screwdriver (Not provided).
STEP 1 Attach backrest (B) and seat (C) into right side frame (A1). Secure Seat (C) using 1 1/2" bolt (E) and backrest (B) using 1 1/4" bolts (D). STEP 2 Attach Left side frame (A2) to the assembly from step 1, secure using 1 1/2" bolt (E) and Backrest (B) using 1 1/4" bolts (D). STEP 3 STEP Secure seat (C) and side frame (A18A2) using 1 3/4" | Tap in the wooden caps (I) to cover bolts head using screws (K). As shown. rubber mallet.
Install the chain with long bolt (F2) to front of side frame (A1 & A2), and chain with short bolt (F1) to the back of side frame (A1 & A2). secure using washer (G) and Nut {H), as diagram shown. Step 6 How to install the swing hanger Find the right beam or joist. Make sure the joist or beams are strong and can support the swing length and weight capacity. If unsure of the strength or location of the joists or beams, contact a professional contractor.
8 FOOT CEILING ———fest | Attach the front hanger screws with a distance of 5 inches beyond the actual swing length (75 inches). then the 35 inch rear hanger screw. Mark the first two points the hanger screw will go. Next, measure the swing length plus 1-2 inches and mark the other two places. The next step, per-drill pilot holes using @6mm drill bit size and attach the screw to the joist or beam. Step 9 16.
MAINTENANCE ‘Wood is a living material that continues to respond to climate condition even after being made into a piece of furniture. After assembly rub the furniture with soft rag to remove any residual dust. Wood is a natural material whose appearance will change when left outdoors. This product has been treated prior to leaving the factory. To clean, use mild soap and warm water.
1 year Limited Warranty The furniture is warranted to be free from defects in material and workmanship of the original product when purchased from one of our authorized dealers. If a product fails and is under the terms of our limited warranty, the item will be replaced, usually for a small fee. In the case of discontinued models, an item of similar quality and style will be offered to the customer. ® | year limited frame warranty Frames are warranted to be free from defects in material and workmanship.