ASSEMBLY INSTRUCTIONS 3 PCS CHAT SET WICKER WITH CUSHION TM610408T roy GS LIT ALARM N os GAY CANTO Vii a Chou TRA: os oa oie Porthole SARTRE SRL TR TE CUSTOMER SERVICE INFORMATION Please do not return to the store. If any pieces are missing call our toll free number at 1-888-287-4275 from 9:00 am to 5.00 pm CST (Monday to Friday) for replacement parts. For faster service, have the style number handy when calling.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the chair. 2. To avoid damage, assemble the chair on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the chair is used. 4. This chair is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. 1. A Phillips screwdriver is necessary for assembly. == It's not included in hardware list.
Attach the Back Rest (B) and Seat (C) into the Right Side Frame (A1). Secure seat 1 1/2" bolt (G) and Washer (D) on the side support, and also with 1 1/2” blat (G), Spring Washer (F) and half moon washer(E) on the front and back support. As shown. Tighten all bolts with Philips Screwdriver, Attach the Left Side Frame (A2) onto the assembly. STEP 3 | Secure by repeating step 1. insert 3/4" Crow (H) to the back of backrest (B). As shown. | Tighten all bolts and screws with Philips Screwdriver.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the table. 2. To avoid damage, assemble the table on a non-abrasive surface such as carpet. 3. Make sure all nuts tightly fastened before the table is used. 4. This table is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening nuts. 1. A Phillips screwdriver is necessary for assembly. == It's not included in hardware list.
STEP 1 Put the table top (A) face down on clean flat surface. Attach 2 pes legs (C) to the table top (A) and secure each leg with washer (D), spring washer (E) and nuts (F). STEP 2 Attach the tray (B) to the legs (C). Attach the other legs (C) into the table top (A) and tray (B), as diagram shown. Secure the legs (C) to table top (A) with washer (D), spring Do not fully tighten all mis yet. washer (E), and nuts (F). STEP 3 STEP 4 Source the tray (B) with 1 1/2" screws (G).
MAINTENANCE Due to teak wood's natural characteristics, wood color and grain variations may be present. This is a symbol of the originality of each unit and gives each finished piece a distinctive look and inherent charm, Care Instruction : Teak wood, when left bare and unhanded, will naturally fade to a silver-gray color. This silver-gray color transformation does not in any way affect the durability of the furniture.
1 year Limited Warranty The furniture is warranted to be free from defects in material and workmanship of the original product when purchased from one of our authorized dealers. If a product fails and is under the terms of our limited warranty, the item will be replaced, usually fora small fee. In the case of discontinued models, an item of similar quality and style will be offered to the customer. «| year limited frame warranty Frames are warranted fo be free from defects in material and workmanship.
