ASSEMBLY INSTRUCTIONS TEAK ROUND TABLE 48" IT-320668TH CUSTOMER SERVICE INFORMATION Please do not return to the store. If any pieces are missing call our toll free number at 1-888-287-4275 from 9:00 am to 5.00 pm CST (Monday to Friday) for replacement parts. For faster service, have the style number handy when calling.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the Table. 2. To avoid damage, assemble the table on a non-abrasive surface such as carpet. 3. Make sure all nuts tightly fastened before the table is used. 4. This table is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening nuts. 1. Wrench For tightening all Nuts. = PARTS AND HARDWARE LIST A. Top table B. Legs C. Washer D.
STEP 1 Insert washers (C), Spring washers (D), and Nuts (E) to secure legs (B) Attach leg (B) into corner of table top (A). Tighten nuts using wrench, Provided. STEP 2 ‘THE TABLE IS NOW READY FOR USE.
ASSEMBLY INSTRUCTIONS TEAK DINING CHAIR IT-120256TH CUSTOMER SERVICE INFORMATION 1-888-287-4275 from 9:00 am to 5.00 pm CST (Monday to Frieda: Please do not return to the store. If any pieces are missing call our toll free number at day) for replacement parts. when cal For faster service, have the style number handy when calling.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the Chair. 2. To avoid damage, assemble the chair on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the chair is used. 4. This chair is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. TOOLS REQUIRED 1. 8" Philips screwdriver (Not provided). For tightening all bolts and screws.
STEP 1 Attach back support (B) and seat (C) into right side frame (A1) Attach left side frame (A2) fo the assembly from step 1, insert 11/4" bolts (D). Tighten all bolts using screwdriver. STEP 3 Invert the chair and repeat step 2 procedure to secure STEP 4 Stand the chair upright. Make sure all parts are correctly connected and tighten all bolts completely using screwdriver. Tapping in the wooden caps (E) to cover bolts head using rubber mallet. Install seat pad CONGRATULATION ! frame..
