ASSEMBLY INSTRUCTIONS 6PC TEAK DINING SET IT-610610TH CUSTOMER SERVICE INFORMATION Please email us at for assembly tips, report damage, or request parts. For faster response, please write down item number, code for missing parts, attach the purchase receipt and picture of damaged parts. Toll fees number © 1-888-287-4278 from $:00 am to 5.00pm CST (Monday to Friday).
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the chair, 2. To avoid damage, assemble the chair on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the chair is used. 4. This chair is net for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. TOOLS REQUIRED 1. 8" Philips screwdriver (Not provided) ~ For tightening all bolts, #.
STEP 1 Attach the apron (DF ito bottom of seat (C0) aud secure using 2 14" bolts (BE). #THRONG TIGHTEN BOLTS YET. STEP 2 Attach right and left side frames (A & AZ) into back support (8). Secure using 17 lobs (F) = DO NOT TIGHTEN BOLTS YET. STEP 3 Next, attach the per-assembled seat into right and left side frames (Al & AZ) (The seat with apron must be attached in front). Secure scat using 1 belts (F) as shown.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior fo assembling the bench, 2. To avoid damage, assemble the bench on a non-abrasive surface such as carpet. 3. Make sure all nuts tightly fastened before the bench is used. 4. This bench is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening nuts. TOOLS REQUIRED 1.
Attach the leg frames (B) into each comer of the top (A) Assemble the washers (C1), spring washers (00) and maid (8) to log Games (BY. Tighten the pews using wrench, STEP 2 Tara the bench up. Make sear all parts are fully connected and tighten ofl the nuts completely using wrench. THE CHAIR IS NOW READY FOR USE.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior fo assembling the table. 2. To avoid damage, assemble the table on a non-abrasive surface such as carpet. 3. Make sure all bolls tightly fastened before the table i used, 4. This table is not for commercial use. Please make sure you have all parts before beginning assembly. Please wall unt all steps are completed before tightening bolts. TOOLS REQUIRED © 1. Allen key (Provided). l For frightening all boils.
~ Rut the table (A} face down on a flat non-abrasive usurious. ~ Attach the leg frames (B) Info table top {A} and secure using washers (6), spring washers (F) and 2 4" bolts (0) as diagram shown. 00 MOT TIGHTEN ALL BOLTS YET, Ned, attach the cross bar (OC) inch per-assembled leg frames (8) and insert 1 1/72" bolls {B) int predicted holes as shown ~ Make sure all parts ans correctly conceded and tighten all bolts completely using Allen wrench.
MAINTENANCE Due to teak wood's natural characteristics, wood color and grain variations may be present, This i a symbol of the originality of each unit and gives cache finished piece distinctive look and inherent charm. Care Instruction : Teak wood, when left bare and sanded, will naturally fade wo a silver-jay color, This silver-gray color transformation does not in any way affect the durability of the furniture.
1 year Limited warranty The furniture is warrantied to be free from defects in material and workmanship of the original product when purchased from one of our authorized dealers. If a product fails and is under the terms of our limited warranty, the item will be replaced, usually for a small fee. In the case of discontinued models, an item of similar quality and style will be offered to the customer, * | year limited frame warranty Frames are warranted 10 be free from defects in material and workmanship.
