ASSEMBLY INSTRUCTIONS TEAK DEEP SEATING THREE CHEATER BENCH IT-150959TH CUSTOMER SERVICE INFORMATION Please do not return to the store. If any pieces are missing call our toll free number at 1-888-287-4275 from 9:00 am to 5.00 pm CST (Monday to Friday) for replacement parts. For faster service, have the style number handy when calling.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the bench. 2. To avoid damage, assemble the chair on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the bench is used. 4. This bench is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. 1. A Phillips screwdriver is necessary for assembly. == It's not included in hardware list. 2.
STEP 1 Attach the back support (B) and back apron (D2) into right and left side frames (A1 & A2). Secure urging 1 1/2" bolts (G) into back support (B) and back apron (D2) as shown. ** DO NOT TIGHTEN BOLTS YET. shown. Next, attach the front apron {D1) into right and left side frames (Al & A2). Secure front apron using 2" bolts (F), as shown. STEP 3 Secure the seat (C) using 1" screws (FH) into front apron (D1) and back apron (D2). Attach the leg frame (E) to bottom seat.