ASSEMBLY INSTRUCTIONS TEAK ROUND COFFEE TABLE WITH SHELF IT-170708 CUSTOMER SERVICE INFORMATION Please do not return to the store. If any pieces are missing call our toll free number at 1-888-287-4275 from 9:00 am to 5.00 pm CST (Monday to Friday) for replacement parts. For faster service, have the style number handy when calling.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the Table. 2. To avoid damage, assemble the Table on a non-abrasive surface such as carpet. 3. Make sure all nuts and screws tightly fastened before the Table is used. 4. This Table is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening nuts and screws. TOOLS REQUIRED 1. 8" Philips screwdriver (Not provided).
STEP 2 Attach the shelf (C) to the legs (B). Attach the other legs (B) into the fable fop (A) and shelf (C), as diagram shown. secure the legs (B) to table top (A) with washers (E), spring washers (F) and nuts (G) STEP 4 Next, upright the table. THE TABLE IS NOW READY FOR USE. STEP 1 Put the table top (A) face down on clean fiat surface. Attach 2 pcs legs (B) to the table fop (A) and secure each leg with washers (E), spring washers (F) and nuts (G). Do not fully tighten all nuts yet.
