User Guide 4th Generation Play 2, 3 or 4 Speakers Together Waterproof Bluetooth Speaker, Incredible Sound, Powerful Volume, 100 Foot Wireless Bluetooth Range OontZ App for the OontZ Angle 3 ULTRA Control the OontZ Angle 3 ULTRA Advanced Features from your iPhone or Smartphone
In the Package User Guide 4th Generation Play 2, 3 or more Speakers Together Waterproof Bluetooth Speaker, Incredible Sound, Powerful Volume, 100 Foot Wireless Bluetooth Range OontZ App for the OontZ Angle 3 ULTRA Control the OontZ Angle 3 ULTRA Advanced Features from your iPhone or Smartphone User Guide USB Type C Charging Cable 3.
Table of Contents Buttons, Lights, and Connectors Battery Features and Charging the Battery Turning On and Off Pair & Connect with Your Device IPX7 Water Resistance Talk to Siri and Hands Free Speakerphone To Play with Non-Bluetooth Devices Use a 3.
Buttons Play/Pause Bluetooth (Dual Function) Press and Release to Pause/Play Track Back Track Forward Press and Release to go to the beginning of the track. Press and Release twice to go to previous track Press and Release to go to next track Volume Down Press to decrease volume Power Volume Up Press to increase volume Important - The volume control on your device and the speaker work independently of each other.
Lights Bluetooth Light lit when speaker is on: - Flashing Blue speaker is in pairing mode - Solid Blue speaker is connected - Blue Light will turn to Solid Green when the 3.
Connectors Built-in Mic for Speakerphone & Siri AUX IN Jack USB Type C Charging Connector Rubber Flap - covers connectors - pull gently from the top to access connectors, it is a snug fit to provide water resistance Note: The rubber flap needs to be closed to keep the speaker water resistant Page 3
Battery Features - The rechargeable battery comes with a partial charge and the speaker is ready to play. - For maximum playtime, fully charge the battery. - You can play while charging. Low Charge Remaining - When the battery charge has less than 15% remaining the Power Button Light will begin flashing Red rapidly. - The volume will decrease to preserve the the remaining battery charge. To return to full volume follow the steps to charge the battery on Page 5.
Charging the Battery Power Light Lit Red when charging: - Slowly flashing battery is charging - Solid battery is fully charged Insert the small end of the USB Type C Charging Cable into the Charging Connector as shown. Insert the larger end of the USB Type C Charging Cable into a USB wall charger for a Smartphone or iPhone (USB wall charger* that is 5V 3A maximum) to charge the OontZ Angle 3 ULTRA battery. * Only use a USB wall charger that is UL listed.
Turning On and Off Turn ON - Press and Release the Power Button - Power Light will turn Red for 3 seconds then turn off - Bluetooth Light will turn Blue Bluetooth Light - Flashing Blue in pairing mode - Solid Blue your device has connected with the OontZ Angle 3 ULTRA and is ready to play Turn OFF - Press and Hold Down the Power Button for 2 Seconds - Bluetooth Light will turn off Page 6
Pair & Connect with Your Device -- Step 1 Turn ON your OontZ Angle 3 ULTRA Bluetooth Light Flashing Blue - The OontZ Angle 3 ULTRA is ready to pair and connect. Bluetooth Light Solid Blue - Your device has connected to the OontZ Angle 3 ULTRA and is ready to play. - The OontZ Angle 3 ULTRA allows the last device it was connected with to automatically reconnect with the speaker each time the speaker is turned on and that device is within range.
Pair & Connect with Your Device -- Step 2 --- With Your iPhone, iPad, iPod, Smartphone, Tablet & Mobile Devices - Go to Settings > Bluetooth, check Bluetooth is on - Select 'OontZ Angle 3U SS xxx' when it appears under DEVICES (xxx: 3 characters which are unique to your speaker) - Your device will connect in a few seconds - The Bluetooth Light will turn solid blue and there will be a quiet chime - You can now play your audio wirelessly to your OontZ Angle 3 ULTRA Note: Your Smartphone or Tablet instructions
Pair & Connect with Your Device -- Step 2 --- With Your Amazon Echo, Amazon Echo Dot or Amazon Echo Input To pair and connect with the Amazon Echo, Amazon Echo Dot or Amazon Echo Input for the first time use the Alexa app. For other Amazon Alexa devices please refer to their pairing and connecting instructions. - Open the Alexa app - Select your Amazon Echo device by pressing 'Devices' in the lower right corner of the screen.
Pair & Connect with Your Device -- Step 2 --- With Your Amazon Echo or Amazon Echo Dot (continued) Important Note: When the OontZ Angle 3 ULTRA is playing from battery power and connected to the Amazon Echo device, the speaker will remain on and it will not automatically turn off after 30 minutes of not playing audio. This will use up the battery charge. We recommend to: 1) Keep the OontZ Angle 3 ULTRA plugged into a USB wall charger. It can remain on and available to play from the Amazon Echo device.
IPX7 WaterProof The OontZ Angle 3 ULTRA is Waterproof and it is IPX7 certified The perfect speaker for listening to your favorite music in any environment Perfect for taking to the lake, the beach, listening by the pool, listening in the shower IPX7 means the OontZ Angle 3 ULTRA is WaterProof and can handle water spray or being splashed and can handle being partially or fully submerged in water up to a maximum of 3 feet deep, for up to a maximum of 30 minutes The rubber flap needs to be closed for the speake
Talk to Siri on your iPhone or iPad through the OontZ Angle 3 ULTRA This feature works when connected to an iPhone or an iPad over Bluetooth.
To Play with Non-Bluetooth Devices Use the 3.5mm Stereo Audio Cable Turn ON your OontZ Angle 3 ULTRA - Plug one end of the included 3.5mm Stereo Audio Cable into the AUX IN jack on the speaker. - The Bluetooth Light will turn solid Green. - Plug the other end of that 3.5mm Stereo Audio Cable into the headphone jack on your device. - Make sure both ends of the cable are fully inserted - You are now ready to play. Important: The Bluetooth on the OontZ Angle 3 ULTRA is disabled when the 3.
Dual Mode - Connect two OontZ Angle 3 ULTRA speakers together Play your music wirelessly through both speakers up to 100 feet apart* Note: The OontZ Angle 3 ULTRA 4th Generation is NOT compatible with the previous generations of OontZ Angle 3 ULTRA speakers.
Connecting two OontZ Angle 3 ULTRA speakers together for Left Channel - Right Channel You can also us the OontZ app to connect two OontZ Angle 3 ULTRA speakers together - See page 26 for instructions on using the OontZ app – Turn on both OontZ Angle 3 ULTRA speakers. – Pair and Connect one of the speakers with your device. When connected the Bluetooth Light This speaker will serve as the Master Speaker. will be lit Solid Blue.
Two OontZ Angle 3 ULTRA Speakers connected for Left Channel - Right Channel Master Speaker Second Speaker Light lit solid Blue or Green Light lit solid White Light OFF Light lit solid White – Use the buttons on the Master Speaker for play/pause, track back, track forward, answer and end phone calls. These controls are disabled on the second speaker when paired together. – Use the Master Speaker for connecting to different audio devices via Bluetooth or AUX IN.
Changing to Dual Stereo from Left Channel - Right Channel Use Dual Stereo when placing the two speakers in different areas, and both speakers will play in full stereo. – To set both speakers for Dual Stereo they must first be connected together for Left Channel - Right Channel (see page 15). – With the speakers connected together for Left Channel - Right Channel, you can change the speakers to Dual Stereo.
Dual Mode - Important Notes Turning the speakers off – Turning the Master Speaker off will turn both speakers off. – Turning the second speaker off first will only turn that speaker off and the Master Speaker will play as a single speaker. Turning the speakers back on – Turn both speakers on and they will automatically try to connect to each other again. – Turn one of the speakers on and a device can connect with it, and play as a single speaker.
Surround Mode - Connect 2, 3 or 4 OontZ Angle 3 ULTRA speakers together Play your music wirelessly through speakers up to 100 feet apart * Note: The OontZ Angle 3 ULTRA 4th Generation is NOT compatible with the previous generations of OontZ Angle 3 ULTRA speakers.
Connecting 2, 3 or 4 OontZ Angle 3 ULTRA speakers together You can also us the OontZ app to connect the OontZ Angle 3 ULTRA speakers together - See page 29 for instructions on using the OontZ app – Turn on one of OontZ Angle 3 ULTRA speakers. – Connect the speaker to your device or connect a 3.5mm audio cable to the Aux In of the speaker. When connected the Bluetooth Light will be lit Solid Blue or Solid Green if using Aux In. This speaker will serve as the Master Speaker.
OontZ Angle 3 ULTRA Speakers connected in Surround Mode Master Speaker Slave Speaker Light lit solid Blue or Green Light lit solid Orange Light OFF Light lit solid Orange – Use the buttons on the Master Speaker for play/pause, track back, track forward, answer and end phone calls. These controls are disabled on the other speakers when connected together. – Use the Master Speaker for connecting to different audio devices via Bluetooth or AUX IN.
Surround Mode - Important Notes Turning the speakers off – Turning the Master Speaker off will turn off all the speakers. – Turning a Slave Speaker off first will only turn that speaker off and the other Slave Speakers will continue to play. The Master Speaker will play as a single speaker if no other Slave Speakers are connected. Turning the speakers back on – Turn all the speakers on and repeat the pairing process - See page 20 for instructions.
The OontZ app Control the advanced features of your OontZ Angle 3 ULTRA from your iPhone or Smartphone running the Android operation system. EQ - Adjust the Treble and Bass levels Volume Control - With a single OontZ Angle 3 ULTRA speaker remotely control the volume.
The OontZ app To enable the OontZ app with your OontZ Angle 3 ULTRA - Turn on your OontZ Angle 3 ULTRA speaker - Launch the OontZ app and the Home screen will appear - Select the Menu in the upper left hand corner of the OontZ app and the Menu screen will appear - Select ‘Speakers’ from the Menu and the Speaker screen will appear Home screen Menu screen OontZ Angle 3 ULTRA icon is Grey - Press the Grey speaker icon on the app to enable the OontZ app with the OontZ Angle 3 ULTRA - The OontZ app will be e
Using the OontZ app for EQ and Volume Control Select the Menu in the upper left hand corner of the app - Select ‘EQ’ from the menu to access the speaker Equalizer screen - Select ‘Volume Control’ from the menu to access the Volume Control screen EQ screen The Left slider adjusts the Bass and the Right slider adjusts the Treble. Press ‘Default EQ’ to set the EQ to the default setting.
Using the OontZ app for Dual Mode Connect two OontZ Angle 3 ULTRA speakers together - Play your music wirelessly through both speakers up to 100 feet apart. Refer to Page 14 for more information about Dual Mode – Turn on one of the OontZ Angle 3 ULTRA speakers. – Pair and Connect the speaker with your device. When connected the Bluetooth Light This speaker will serve as the Master Speaker. will be lit solid Blue. – Enable the OontZ app with the OontZ Angle 3 ULTRA speaker.
Using the OontZ app for Dual Mode Select the Menu in the upper left hand corner of the app and select ‘Dual Mode’ from the menu. Press ‘Connect’ to connect two OontZ Angle 3 ULTRA speakers in Dual Mode. After a few seconds the light above the Play/Pause Button on the second speaker will be lit solid White. The Master Speaker will say “Left Channel” and the second speaker will say “Right Channel”. The speakers are connected together for Left Channel - Right Channel and you are ready to play.
Using the OontZ app for Dual Mode Use Dual Stereo when placing the two speakers in different areas, and both speakers will play in full stereo. – With the speakers connected together for Left Channel - Right Channel, you can change the speakers to Dual Stereo. – To change to Dual Stereo, press ‘Dual Stereo’. – Both speakers will say “Dual Stereo” and you are ready to play. Use Left Channel - Right Channel for incredible left and right stereo seperation.
Using the OontZ app for Surround Mode Connecting 2, 3 or 4 OontZ Angle 3 ULTRA speakers together – Turn on one of OontZ Angle 3 ULTRA speakers. – Connect the speaker to your device or connect a 3.5mm audio cable to the Aux In of the speaker. When connected the Bluetooth Light will be lit Solid Blue or Solid Green if using Aux In. This speaker will serve as the Master Speaker. – Turn on the other OontZ Angle 3 ULTRA speakers. These speakers will be the Slave Speakers.
Using the OontZ app for Surround Mode Selecting the Slave Speaker(s) Press the ‘Slave Speaker’ Button. The other OontZ Angle 3 ULTRA speakers that are turned on and within range will be displayed. Select the Grey boxes in the list of displayed speakers that you want to connect with the Master Speaker in Surround Mode. The selected speaker boxes will turn from Grey to Blue. The light above the Play/Pause Button on the selected speakers will flash Orange.
Using the OontZ app for Surround Mode Disconnecting and reconnecting the OontZ Angle 3 ULTRA speakers in Surround Mode To disconnect a Slave speaker in Surround Mode, press the ‘Slave Speaker’ Button. Select a desired speaker from the list of displayed speakers. Confirm you want the speaker to exit Surround Mode. The box will turn from Blue to Grey, the speaker will disconnect from the Master Speaker and the speaker will exit Surround Mode.
Using the OontZ app for Speaker selection The OontZ app allows you to control different supported OontZ speakers. The OontZ app currently supports the following OontZ speaker models: - OontZ Angle 3 ULTRA (4th Gen) - OontZ Angle 3 Pro - OontZ Angle 3 Shower with Alexa (OontZ app support only for Alexa function) - OontZ Bluetooth Adapter (2nd Gen) For the latest list of supported OontZ speakers please visit TheOontZ.com/OontZapp To utilize the OontZ app with a different supported OontZ speaker.
Using the OontZ app for Support Select the Menu screen. in the upper left hand corner of the app and select ‘Support’ from the menu to access the Support Press ‘User Guide’ to display the latest version of the online user guide and FAQ for the OontZ Angle 3 ULTRA. Press ‘Update Speaker’ to check the version of the current firmware version on the OontZ Angle 3 ULTRA and whether there is a new version available. Press ‘Contact Us’ to display the customer support form.
Customer Support If you have a question about your OontZ Angle 3 ULTRA or experience an issue with the speaker, our Customer Support Team wants to assist you. For online troubleshooting tips please visit: TheOontZ.com/troubleshooting and select the OontZ Angle 3 ULTRA (4th Generation) For latest version of this manual please visit: TheOontZ.com/pages/manuals and select the OontZ Angle 3 ULTRA (4th Generation) Reset Function Step 1: Remove the Type C USB Charging Cable and 3.5mm Audio Cable, if connected.
Safety and Precautions 1. When the OontZ Angle 3 ULTRA speaker is plugged in to a charging source with the USB Type C Charging Cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock. 2. Read and follow all instructions – All operating and use instructions should be followed. 3. Protect the USB Type C Charging Cable from being pinched, particularly at the connectors. 4.
Safety and Precautions (continued) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
OontZ Bluetooth Adapter (2nd Generation) OontZ True Wireless BudZ ULTRA • Allows you to play wirelessly over Bluetooth from your TV and Devices that do not have built-in Bluetooth. • Totally Wireless • When playing with two OontZ Angle 3 ULTRA speakers, using the OontZ Bluetooth Adapter with it’s low latency technology removes or eliminates the delay in the audio playback from the video and allows the audio to play in sync with the video.