Quick Start Guide Ultra-Portable Bluetooth Speaker Designed and Engineered By Please visit TheOontZ.
Table of Contents Pages In the Package Buttons and Connectors Charging the Battery Turning On and Off Pair & Connect - Step 1 Pair & Connect - Step 2 --- From Your From Your iPhone, iPad, Smartphone, Tablet and Mobile Devices -- From Your Apple Mac or Windows 10 Laptop/Computer -- From Your Amazon Echo Dot Playing From Your Windows 7 or 8 Laptop/Computer and Non-Bluetooth Audio Devices Using the 3.
In the Package Quick-Start Guide Micro USB Charging Cable OontZ Angle 3 Speaker 3.5mm Audio Cable Note: The Micro USB Charging Cable and the 3.5mm Audio Cable are packed below the cardboard insert in the box. Slide out the insert to locate the cables.
Buttons and Connectors Built-in Mic for Speakerphone Bluetooth LED Light (Blue) (LED is only visible when speaker is turned on) Bluetooth Button (Dual-Function) Charging LED Light (Red) (LED visible when connected to a charging source) Power Button Rubber Flap (lifts up from bottom) AUX IN Jack (located under rubber flap) Volume Down Button Micro USB Charging Port (located under rubber flap) Play/Pause Button Volume Up Button Page 2
Charging the Battery Charging LED Light (Red) The lithium ion rechargeable battery will have a partial charge and be ready to play. For maximum playtime, fully charge the battery. You can play while charging. To charge the battery: Step 1: Lift up the rubber flap from the bottom to access the Micro USB Charging Port. Step 2: Insert the smaller end of the Micro USB Charging Cable into the Micro USB Charging Port as shown.
Charging the Battery (continued) Insert the larger end of the Micro USB charging cable into either a USB wall charger (5V 1.0A up to 5V 2.4A maximum) for a Smartphone or iPhone, or a USB port on your laptop/computer to charge the OontZ Angle 3 battery.
Charging the Battery (continued) Music Play Time Up to 12 hours on a full charge, at 2/3 volume. Louder volumes will reduce the battery play time. Play while charging You can play the OontZ Angle 3 while it is charging. Power Saving Feature - When playing from battery power the OontZ Angle 3 will turn off after 15 minutes of not playing audio to conserve the battery charge.
Turning On and Off Charging LED Light (Red) Power Button Bluetooth LED Light (Blue) Turn ON Press and Release the Power Button Charging LED Light (Red) Turns on for one to two seconds, then turns off when playing from battery power Bluetooth LED Light (Blue) Blue light will turn on Flashing Blue indicates speaker is on and in pairing mode Solid Blue indicates speaker is on and connected to a source device and ready to play Turn OFF Press and Hold Down the Power Button for 3 Seconds Bluetooth LED Ligh
Pair & Connect -- Step 1 - Make sure your OontZ Angle 3 battery has a sufficient charge - Your audio source device needs to be within 33 unobstructed feet of the OontZ Angle 3 Turn ON your OontZ Angle 3 The Bluetooth LED Light (Blue) will turn on. If the blue light is flashing the OontZ Angle 3 is ready to pair and connect. If the blue light is solid the OontZ Angle 3 has automatically reconnected to the last audio source device the speaker was connected to and is ready to play.
Pair & Connect -- Step 2 --- From Your iPhone, iPad, Smartphone, Tablet and Mobile Devices To pair and connect from an iPhone, iPad, or iPod: - Go to Settings > Bluetooth, check Bluetooth is on - Select ‘OontZ Angle’ when it appears under OTHER DEVICES - The speaker will connect in a few seconds - The Bluetooth LED Light (Blue) will be solid blue - You can now play your audio wirelessly to your OontZ Angle 3 To pair and connect from a Smartphone or Tablet: - Go to Settings > Bluetooth, check Bluetooth is o
Pair & Connect -- Step 2 --- From Your Amazon Echo Dot Turn on your OontZ Angle 3 first and make sure it is in pairing mode (refer to Page 7) To pair and connect your OontZ Angle 3 the first time from the Amazon Echo Dot you need to use the Alexa app on your iPhone, iPad, Smartphone, or Tablet. First make sure to disconnect any other Bluetooth device from the Amazon Echo Dot. The Amazon Echo Dot can only connect to one Bluetooth device at a time.
Pair & Connect -- Step 2 --- From Your Amazon Echo Dot (continued) Now that the Amazon Echo Dot is paired to the OontZ Angle 3, if the speaker becomes disconnected or turned off, to re-connect turn on the OontZ Angle 3 and just say “Alexa, connect my speaker ” or “Alexa, pair” Important Note: When the OontZ Angle 3 is playing from battery power and connected to the Amazon Echo Dot, the Amazon Echo Dot disables the power saving feature on the OontZ Angle 3 speaker.
Playing From Your Windows 7 or 8 Laptop/Computer and Non-Bluetooth Audio Devices Using the 3.5mm Audio Cable - Make sure your OontZ Angle 3 battery has a sufficient charge Plug one end of the included 3.5mm audio cable into the AUX IN Jack on the back of your speaker. Plug the other end of the 3.5mm audio cable into the headphone jack on your laptop/computer or non-Bluetooth audio device. You are now ready to play. - Note: The Bluetooth on the OontZ Angle 3 is disabled when the 3.
IPX5 Water Resistance No more worries about the rain or getting splashed. Listen to music in the shower. Perfect for taking to the beach or by the pool.
Wireless Hands Free Personal Speakerphone The Wireless Hands Free Personal Speakerphone feature works for calls with Smartphones and iPhones only, connected over Bluetooth. Bluetooth Button (Dual Function) To answer an Incoming Call / To End a Call Press and Release the Bluetooth Button To Reject an Incoming Call Press and Hold Down the Bluetooth Button for 3 Seconds Please keep the speaker close in front of you so you may be heard clearly by the listener.
Troubleshooting For the most up to date troubleshooting tips please visit: TheOontZ.com/troubleshooting/oontz-angle-3 OontZ Angle 3 will not turn on • The battery may have become fully drained. Charge the OontZ Angle 3 using a USB wall charger from a Smartphone/iPhone or tablet for at least 15 minutes, then press the power button to turn the speaker on. Then continue charging the battery. • Reset the OontZ Angle 3, follow the reset instructions on page 19.
Troubleshooting Cannot pair or connect to the OontZ Angle 3 (continued) --- For iPhone, iPad, iPod • Turn off the OontZ Angle 3 speaker, go to the Bluetooth device list on your iPhone, iPad or iPod and check if the OontZ Angle is listed. If it listed press the icon next to the OontZ Angle and then forget this device, twice.
Troubleshooting Cannot pair or connect to the OontZ Angle 3 (continued) --- For Windows systems • Please go to the Bluetooth device list and if the OontZ Angle is listed please remove it. With the OontZ Angle removed or if was not listed, restart your Computer and then try again to pair and connect. For pairing and connecting Guide for your Windows system go to TheOontZ.com/Pairing • If your Windows system displays an error message requesting a driver you need to update your computer's Bluetooth driver.
Troubleshooting Poor sound quality when connected over Bluetooth • Your Bluetooth device may be out of range, move closer within 30 unobstructed feet. • Remove the OontZ Angle 3 from the Bluetooth device list on your audio source device, restart your audio source device, and then re-pair and connect to the speaker. • Turn your OontZ Angle 3 off and back on. • Some audio source devices need to have their WIFI turned off to improve audio quality over Bluetooth.
Troubleshooting If you're having trouble trying to connect your Amazon Echo Dot to your OontZ Angle 3 • Make sure that the OontZ Angle 3 is not connected to any other audio source device. If the blue light is solid you will need to disconnect the currently paired audio source device (see page 7). • Check that the battery for your OontZ speaker has a sufficient charge, plug your speaker into a charging source. • Disconnect any other Bluetooth devices from Amazon Echo Dot.
Resetting Your OontZ Angle 3 Step 1: Remove the Micro USB charging cable and 3.5mm Audio cable, if connected Step 2: Turn on your OontZ Angle 3 Step 3: Insert either a toothpick or straightened paper clip into the AUX IN jack until it makes contact with the micro switch. Gently push and release the switch and the speaker will reset.
Customer Support For assistance with questions or any issue with your OontZ Angle 3 that is not answered in the troubleshooting tips, please contact us by visiting: TheOontZ.com/support and filling out our customer service form. Safety and Precautions 1. When the OontZ Angle 3 speaker is plugged in to a charging source with the Micro USB charging cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock. 2.
Safety and Precautions (continued) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
OontZ Angle 3 Carry Case Sold separately • Lightweight neoprene rubber with reinforced zipper • Includes a durable aluminum carabiner for easily attaching to backpacks, luggage, laptop bags, coolers, camera bags, purses, belts, and other clippable items Available at TheOontZ.com: TheOontZ.
