User Manual

Now that the Amazon Echo Dot is paired to the OontZ Angle 3, if the speaker becomes disconnected or turned off, to re-connect
turn on the OontZ Angle 3 and just say “Alexa, connect my speaker ” or “Alexa, pair”
Important Note: When the OontZ Angle 3 is playing from battery power and connected to the Amazon Echo Dot, the Amazon Echo Dot
disables the power saving feature on the OontZ Angle 3 speaker. The speaker will remain on and it will not automatically turn off after 15
minutes of not playing audio. The Amazon Echo Dot is continuing to communicate to the speaker even when not playing audio and will
use up the battery charge, at the same rate as full volume audio.
We recommend either: 1) Keeping the OontZ Angle 3 plugged into a USB wall charger or USB port on a laptop/computer,
so it can remain on and available to play from the Amazon Echo Dot, without having the battery becoming drained. Or, 2)
Turning the OontZ Angle 3 off when you are done listening. You can turn the OontZ Angle 3 speaker off by pressing and
releasing the Power button on the OontZ Angle 3, or you can say "Alexa, disconnect my speaker" and the OontZ Angle 3 will
automatically turn off after 15 minutes. When you want to play to the speaker again turn on the OontZ Angle 3 and say “Alexa,
connect my speaker ” or “Alexa, pair” and the Amazon Echo Dot will connect and the audio will play through the OontZ Angle 3.
If you need assistance with your Alexa app, contact Amazon's support through the app.
Open the Alexa app and select Help & Feedback > Email Customer Service
Page 10
Pair & Connect -- Step 2 --
-- From Your Amazon Echo Dot (continued)