User Manual

Playing From Your Windows 7 or 8 Laptop/Computer and
Non-Bluetooth Audio Devices Using the 3.5mm Audio Cable
Plug one end of the included 3.5mm
audio cable into the AUX IN Jack on the
back of your speaker.
Plug the other end of the 3.5mm audio
cable into the headphone jack on your
laptop/computer or non-Bluetooth
audio device.
You are now ready to play.
- Make sure your OontZ Angle 3 battery has a sufficient charge
- Note: The Bluetooth on the OontZ Angle 3 is disabled when the 3.5mm audio cable is connected to the speaker.
You need to remove the 3.5mm audio cable from the speaker in order to connect to a Bluetooth audio source device.
Page 11
- Note: Close the rubber flap when not using the 3.5mm audio cable. The rubber flap needs to be closed to keep the speaker water resistant.