Manualshelf

User Manual

ManualsBrandsCambridge Soundworks ManualsElectronicsOontZ Angle 3 Bluetooth Portable Speaker, Louder Volume, Crystal Clear Stereo Sound, Rich Bass, 100 Foot Wireless Range, Microphone, IPX5, Bluetooth Speakers (Black)
11121314151617181920
OontZ Angle 3 will not turn on
• The battery may have become fully drained. Charge the OontZ Angle 3 using a USB wall charger from a Smartphone/iPhone or tablet for at
least 15 minutes, then press the power button to turn the speaker on. Then continue charging the battery.
• Reset the OontZ Angle 3, follow the reset instructions on page 19.
For the most up to date troubleshooting tips please visit: TheOontZ.com/troubleshooting/oontz-angle-3
Cannot pair or connect to the OontZ Angle 3
• Check that your OontZ Angle 3 has a sufficient battery charge, the speaker may not connect when the battery has a low charge.
Connect the speaker to a charging source and try again to pair and connect.
• Your audio source device may be out of range. Move it closer to within 30 unobstructed feet of your speaker.
• Check the Bluetooth LED light (Blue) to make sure it is flashing. If it is solid blue the OontZ Angle 3 is already connected to another
audio source device. The OontZ Angle 3 can be connected to one audio source device at a time. You need to disconnect the connected
audio source device then you can connect to the next audio source device. Please see instructions on page 7.
• Your audio source device may have a temporary Bluetooth connection issue. Please try the following steps for your specific audio
source device which can resolve this: (continued next page)
Page 14
Troubleshooting