Manualshelf

User Manual

ManualsBrandsCambridge Soundworks ManualsElectronicsOontZ Angle 3 Bluetooth Portable Speaker, Louder Volume, Crystal Clear Stereo Sound, Rich Bass, 100 Foot Wireless Range, Microphone, IPX5, Bluetooth Speakers (Black)
11121314151617181920
-- For iPhone, iPad, iPod
• Turn off the OontZ Angle 3 speaker, go to the Bluetooth device list on your iPhone, iPad or iPod and check if the OontZ Angle is listed. If
it listed press the icon next to the OontZ Angle and then forget this device, twice. With the OontZ Angle removed from the list or if it
was not listed, do a hard reset on your iPhone, iPad or iPod by pressing and holding down the Home and sleep buttons at the same
time for about 10 seconds until the Apple icon appears and it restarts. When it restarts turn on the OontZ Angle 3 and then try again to
pair and connect. Please see instructions on page 7.
Cannot pair or connect to the OontZ Angle 3 (continued) --
-- For Smartphones and Tablets
• Turn off the OontZ Angle 3 speaker, go to the Bluetooth device list on your Smartphone or Tablet and check if the OontZ Angle is listed.
If it listed press the icon next to the OontZ Angle and then press Unpair this device. With the OontZ Angle unpaired or if it was not
listed, do a hard restart on your Smartphone or Tablet. When it restarts turn on the OontZ Angle 3 and then try again to pair and
connect. Please see instructions on page 7.
• Please go to the Bluetooth device list and if the OontZ Angle is listed please remove it. With the OontZ Angle removed or if was not
listed, restart your Apple Mac and then try again to pair and connect. For pairing and connecting Guide for your Apple Mac visit
TheOontZ.com/Pairing
Page 15
Troubleshooting
-- For Apple Mac